Kyocera Triumph-Adler P-4025w - Page 121

6-21
Sending Faxes from PC > Basic Transmission
Attaching and Transmitting a Cover Page
1
Open the Transmit Settings dialog box.
Perform Steps 1 to 6 of the Basic Transmission method to display the Transmit Settings dialog box.
When selecting the destination from an Address Book, refer to “(1) Selecting a Destination
from the Address Book”, select the destination, and go to Step 4.
2
Enter the fax number.
In the [Address Setting] tab, enter the destination fax number and click on the [Option
Settings] button.
3
Enter the recipient information.
When finished, click the [OK] button.
Basic Transmission (page 6-8)
(1) Selecting a Destination from the Address Book (page 6-15)
Item Description
FAX Number A maximum of 64 characters can be entered.
Item Description
Company A maximum of 32 characters can be entered.
Department A maximum of 32 characters can be entered.
Recipient A maximum of 32 characters can be entered.
NOTE
When [Attach Cover Page] of the [Cover Page] Tab is not set, the Cover Page
Confirmation screen will be displayed.
To include a cover page, click on [Attach Cover Page] button.
2
1