Kyocera Triumph-Adler P-4025w - Confirmation Screen of Destinations

7-11
Managing Jobs > Confirmation Screen of Destinations
Confirmation Screen of Destinations
When selecting [On] for [Check beforeSend], the confirmation screen of destinations appears after pressing the [Start]
key.
Machine’s Operation Guide
Follow the steps below to confirm the destinations.
1
Check all destinations.
Select [▲] [▼] key, and confirm every destination.
2
Check the details of the destinations.
Use the following operations to check the details of the destinations.
1 Select the destination to check the details of.
2 [OK] key > [Detail] > [OK] key
3 The details of the destination are displayed. When the check has been completed, select
the [OK] key.
3
Change a destination.
Delete a destination
1 Select the destination you want to delete.
2 [OK] key > [Delete] > [OK] key > [Yes]
The destination is deleted.
Add a destination
To add the destination, select [Cancel] and then return to the destination screen.
4
Select [Next].
When you have finished checking all destinations, select [Next].
5
Press the [Start] key.
Start sending.
NOTE
Always display all of the destinations and check them. The transmission is not possible
unless all the destinations are displayed.