Kyocera Triumph-Adler P-4025w - Received FAX Sizes and Paper Priority (Metric Model)

10-12
Appendix > Received FAX Sizes and Paper Priority (Metric Model)
Received FAX Sizes and Paper Priority (Metric Model)
When no paper loaded in the cassettes matches the received fax size and orientation, the machine automatically
chooses the printing paper according to the following priority.
Received FAX Size
Priority
A5 A4 Folio A4 Long Originals*
* A4 Long Originals: Originals longer than A4 in the direction of the paper feed.
Folio Long Originals**
** Folio Long Originals: Originals longer than Folio in the direction of the paper feed.
Paper Size
1 A5 A4 Folio A4 Folio
2A5-R***
*** Paper orientation is different from the received document. The image is printed after being rotated 90°automatically.
Folio A4 A4****
**** The document is printed on this paper when the length of the document received is 351 to 380.4 mm and the cassette set as
the Folio size is empty.
3A4 B5***
,
*****
***** Images shorter than the A4 vertical length (297 mm) are received and then reduced and printed on B5 paper (horizontal width
182 mm).
: indicates print output on 2 sheets.
A4 A4
4Folio
5B5***
NOTE
When a paper type is selected in [FAX Media Type], a received fax is printed using the matching paper source.
Media Type for Print Output (page 4-6)
Even if [All Media Type] is selected, a received fax cannot be printed when the paper type loaded in the paper source
is not suitable for fax printouts.