Kyocera Triumph-Adler P-4025w - Media Type for Print Output

4-6
Receiving Faxes > Media Type for Print Output
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
For more information about configuring settings, refer to the following:
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1
Display the screen.
1 [System Menu/Counter] key > [▲] [▼] key > [Common Settings] > [OK] key >
[▲][▼]key > [Orig./Paper Set.] > [OK] key
2 Select the cassette ([Cassette 1 (to 3) Set.] or [MP Tray Set.]) you want to use for fax
reception.
3 Select the [OK] key.
2
Selecting the paper size.
1 [Cassette 1 (to 3) Size] or [MP Tray Size] > [OK] key
2 Select the paper size.
3 Select the [OK] key.
To specify the paper size, refer to the following:
3
Selecting the paper type.
1 [Cassette 1 (to 3) Type] or [MP Tray Type] > [OK] key
2 Select the paper type you want to use for fax reception.
3 Select the [OK] key.
4
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same
paper type as you selected in step 3.
For more information about configuring settings, refer to the following:
Supported paper types All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond,
Cardstock, Color, Envelope, Thick, High Quality, Custom 1-8
FAX Media Type (page 8-8)
IMPORTANT
The following paper sizes can be used for fax reception.
Inch models: Letter, Legal, Statement
Metric models: A4, B5, A5-R, A5, Folio
Machine’s Operation Guide
FAX Media Type (page 8-8)