－ 3 －
# CAUTION
● Always make sure to set the Range switch to the appropriate position before
making a measurement.
● Set the Range Switch to OFF position after use and disconnect the
test leads from the instrument. Remove the battery if the instrument is to be
stored and will not be used for a long period.
● Do not expose the instrument to the direct sun, high temperature and
humidity or dewfall.
● Use a cloth dipped in alcohol for cleaning the test leads and the part around
the measuring terminals.
● Do not store the instrument if it is wet.
● The Voltage warning mark is being displayed during a measurement and it
flashes when voltages 30V(DC/AC) or more exist on the circuit under test.
Symbols
Danger of possible electric shock
Instrument with double or reinforced insulation
DC
AC
Earth terminal
Crossed-out wheel bin symbol (according to WEEE Directive: 2002/96/
EC) indicating that this electrical product may not be treated as
household waste, but that it must be collected and treated separately.
To Next Page
Loading...
Need help?
General
