KYORITSU KEW 6010B User Manual

— 29 —
9.3 Delete the stored data
Stored data can be deleted according to following sequence.
(1) Press
to enter into MEMORY MODE (" " appears on LCD).
NORMAL MODE MEMORY MODE
(2) Press to recall.
(3) Press or and select
Data No.
("ALL" ←→ 000 - 299 ←→ "ALL")
(4) Press .
"clr" is displayed and blinking
(5) Press , the data is deleted with beep.
Press
, the data is not deleted.
After either operation, returns to Data No.
Note: By pressing MEMORY MODE SWITCH
during an operation, can
also undo the last action or release MEMORY MODE.
Measurement cannot be performed when Test button is pressed in
MEMORY MODE.
Select "ALL" at STEP(3) to delete all stored data.
Undo
or
Delete
Notdelete
w ww. .com
information@itm.com1.800.561.8187

KYORITSU KEW 6010B Specifications

General

Brand	KYORITSU
Model	KEW 6010B
Category	Test Equipment
Language	English