KYORITSU KEW 6310 - Saving Inst Measurement Data····························································································

KEW6310 6.3.1 Instantaneous value measurement -Saving procedure
KEW6310 6.12
6.3 Data Saving
6.3.1 Saving Inst measurement data
Saving procedure
1 Press the F1 Key at the List or Zoom screen.
2 Press the F4 Key and check the Basic, Measurement and Save settings. Press the
Cursor Keys to select and modify the settings. Pressing the F3 Key returns to the previous
screen.
* Pressing down the F1 Key for 2 sec or more while in the status 1, step 2 can be skipped and start data
saving.
For further details of Basic, Measurement and Save Settings, refer to “Section 4 Settings” in this manual.
Basic Setting
Measurement
Setting
Save Setting