3.2.1 Battery KEW6310
3.7 KEW6310
Battery charge starts and the screen returns to normal.
● Charging batteries
Indications on the instrument during a charging are as follows.
Indications
LCD ON Battery mark on the LCD flashes.
LED status indicator doesn’t light up.
LCD OFF or
Instrument is OFF
LED status indicator flashes in red.
LED status indicator flashes in green while
recording data.
Slide and set the Selector Switch to the proper position prior to installing the Selector Switch Cover.
The instrument should be used with the Switch set to the proper position. Never make measurement without
installing the Cover.
To Next Page
Loading...
