Need help?Do you have a question about the Kyoto Seimei and is the answer not in the manual?
Verify telescope mechanism shapes and positions using visual cues and stickers.
Confirm distances between seals and arrow alignment for home position.
Step-by-step power-on procedure for control panels.
Executing commands on computers and using the remote controller.
Initiating software and configuring observation parameters via prompts.
Performing the automated Zero Point search under Dome control.
Activating feedback control and launching the KOOLS observation software.
Initializing motors and starting the first exposure sequence.
Choosing the VPH-blue filter for calibration and setting exposure parameters.
Selecting instruments and controlling calibration lamps (Flat, Ne, Hg).
Setting exposure times (15-20s, 1s, 5s) and running exposure sequences.
Opening and inspecting calibration .fits files using the DS9 software.
Checking images for oversaturation and adjusting exposure or lamp settings.
Taking BIAS images and returning the telescope to its home position.
Opening the dome, shutter, and connecting the ZWO camera.
Performing M1 alignment and tracking celestial objects.
Using the catalog to select targets and preparing for observations.
Executing the shutdown sequence for the telescope system.
Closing software screens and powering off control panels.
Closing curtains and reviewing important observation notes.
To Next Page
General