6
EN
and connect the charger cable. The red LED lights
continuously ashes while the device is being
charged.
When the battery becomes too low during use, the
device switches o automatically and saves the
recorded le.
Switching On:
Press the power on/o key for about 3 seconds until
the red LED lights up. When the LED changes from
red to continuous blue, the device is operational
standby mode.
Switching Off:
Press the power on/o key until the red LED ashes
quickly three times. Attention: In stand-by mode the
device switches o automatically after 3 minutes,
when no video, photo or audio is recorded.
To Next Page