Need help?Do you have a question about the L-Acoustics SB18 and is the answer not in the manual?
General| Nominal Directivity | Omnidirectional |
|---|---|
| Nominal Impedance | 8 ohms |
| Power Handling | 700 W RMS |
| Components | 18'' LF speaker |
| Connectors | 2 x NL4 |
| Driver | 18'' |
| Enclosure | Baltic birch plywood |
Lists crucial safety guidelines for using the product.
Amplified controllers for driving SB18.
Explains setups for flying and stacking SB18 arrays with rigging systems.
Describes how to connect the SB18 to LA4 and LA8 amplified controllers.
Introduces STANDARD and CARDIOID modes for system configurations.
Explains STANDARD mode for omni-directional coverage with front grills facing audience.
Details connecting SB18 enclosures to LA4 and LA8 controllers in standard mode.
Describes presets for using SB18 with KUDO, KARA, KIVA/KILO, ARCS, XT systems.
Explains CARDIOID mode for rear SPL rejection with one reversed subwoofer.
Details connecting SB18 for cardioid arrays to LA4 and LA8 controllers.
Describes cardioid presets for SB18 with KUDO, KARA, ARCS, XT systems.
Outlines the methods for testing product performance and integrity.
Describes how to perform an acoustical check using a sweep frequency generator.
Details inspecting enclosure, parts, and connections for structural integrity.
Lists steps and requirements for authorized service and repairs.
Lists replacement kits and tools for SB18 service procedures.
To Next Page
