1. Assemble according to the illustration and tighten all
eyebolts securely.
2. Make sure the heater is properly positioned before
use and is hung level. Observe and obey all minimum
safe distances of the heater to the nearest
combustible materials. Minimum safe distances are
given on the heater dataplate.
3. See figure for
typical
indoor installation. In any animal
confinement building, consideration must be given to
making sure the heater is located away from the
livestock so that livestock cannot knock the heater,
tear it loose from its mounting, or damage the heater,
its power supply cord, or its gas supply line in any way.
Make sure you observe and obey minimum clearance
distances to combustible materials as stated in the
specification section of this owner’s manual and on
the heater itself.
Hanging Instructions
Installation
Instructions
2.10-11
August 1999
Cage Nut
To Next Page
Loading...
