QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11
specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.1
Final Assembly Instructions – Bikes with 16” Wheel Size
Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final
assembly. Prior to shipping, our expert cycling technicians completely assembled and tuned your bicycle to ensure that
all components are functioning properly. However, for shipping purposes we have to partially disassemble your bicycle.
Although this bicycle has been factory pre-assembled, some loosening may have occurred during shipping and handling.
WARNING: BEFORE ALLOWING A CHILD TO RIDE THIS BICYCLE, read the enclosed Owner’s Manual
thoroughly. The Owner’s Manual includes important information on customizing the bike for an optimal fit.
Tools required for final assembly:
• Cutting-type pliers – for removal of packaging materials, including “zip-ties”
• 5mm & 6mm Allen wrenches – for tightening stem bolt
• 15mm wrench or adjustable wrench – for tightening pedals
• 13mm wrench or adjustable wrench – for tightening handlebar stem and seat binder bolt
• Two 10mm wrenches or two adjustable wrenches or one of each – for attaching front fender
BEFORE GETTING STARTED:
PLEASE REMOVE BICYCLE FROM BOX AND REMOVE PACKAGING MATERIAL. Recommended tool –
diagonal-cutting pliers, wire cutter, heavy-duty shears, or multi-tool wire cutter.
To Next Page
Need help?
General