Need help?Do you have a question about the L3 comminications WX-500 and is the answer not in the manual?
General| Manufacturer | L3 Communications |
|---|---|
| Model | WX-500 |
| Measurement Parameters | Wind speed, wind direction, temperature, humidity, pressure, precipitation |
| Wind Direction Range | 0 to 360 degrees |
| Humidity Range | 0 to 100% RH |
| Pressure Range | 600 to 1100 hPa |
| Precipitation Detection | Yes |
| Technology | Ultrasonic |
| Wind Speed Range | 0 to 75 m/s |
| Output Interface | RS-422 |
| Weight | Approx. 5 kg |
Overview of the WX-500 sensor detecting electrical discharges within a 200 nmi radius.
Details the compact computer processor receiving, processing, and forwarding data to the MFD.
Describes the sealed, aerodynamic antenna detecting atmospheric electrical discharges with sense channel technology.
Explains how the WX-500 components connect to each other and other aircraft systems.
Lists key capabilities like passive operation, MFD control, heading stabilization, and self-tests.
Explains thunderstorm formation, electrical charge separation, and discharge radiation.
Describes the cumulus, mature, and dissipating phases of thunderstorms and associated risks.
Describes the self-test procedure and checks performed on system activation for proper operation.
How the system automatically adjusts discharge point positions based on aircraft heading input.
Information on detecting faults, types, causes, and recommended actions for system troubleshooting.
Warning for imminent, close-range storms requiring course change to avoid the developing cluster.
To Next Page
