2.INSTALLATION
INITIAL ADVICE
• The device must be installed on a floor with adequate capacity. If the existing building
does not meet this requirement, appropriate measures (eg, load distribution plate)
must be taken.
• The installation must guarantee easy access to clean the stove, the smoke pipes and
the chimney as well.
• Air extraction fans, when installed in the same space or room with the stove can
cause problems
• All local regulations must be respected in the installation of the device.
• Do not use the stove as an incinerator or in any other way different from the one it
has been conceived for.
• Do not use fuels different from those recommended.
• Do not use liquid fuels.
• The device, especially the external surfaces, while it is working gets hot the touch.
Handle carefully to avoid burns.
• Do not perform any unauthorized modification to the stove.
• Use only original replacement parts recommended by the manufacturer.
To Next Page
Loading...