Need help?Do you have a question about the La Cimbali M100 and is the answer not in the manual?
General| Model | M100 |
|---|---|
| Brand | La Cimbali |
| Category | Coffee Maker |
| Interface | Touchscreen |
| Steam Wand | Yes |
| Hot Water Spout | Yes |
| Voltage | 220-240 V |
| Smart Boiler | Yes |
| Bluetooth Connectivity | No |
| Boiler Capacity | 10 liters |
| Dimensions | 570 mm (D) |
| Group Heads | 2, 3 |
Details about how the machine is packaged for delivery and handling.
Procedures for verifying the appliance upon delivery and checking for damage.
Specifies the quality and treatment requirements for water used in the machine.
Instructions to follow before operating the machine, including initial washing.
Guidelines for safe and correct operation of the machine while in use.
Manufacturer's disclaimers and general safety advice for machine use.
Specific warnings about hot surfaces and avoiding contact with hot parts.
Details regarding the proper disposal of the machine and its electronic components.
Explanation of symbols for boiler water level and heating resistance status.
Symbols indicating boiler pressure, Wi-Fi, Bluetooth, USB, and SD card status.
Options for setting the number of buttons on the machine's interface.
Description of the additional FLUSH button for group rinsing operations.
Overview of the BDS for guiding coffee grinding and dispensing operations.
Explanation of how the BDS system recognizes filter holders and enables dispensing.
How to use the Turbosteam selector to select milk frothing types.
Procedure for cleaning steam nozzles after each dispensing phase.
Description of the Turbo Milk system for heating and whipping milk.
Guidelines for milk storage temperature and daily disposal to ensure hygiene.
Setting automatic switch-on/off times and closure days for the machine.
How to manually turn the machine on when automatic functions are set.
Instructions for choosing the display language for the machine interface.
How to view and reset beverage and dispensing counters for usage analysis.
Procedure for programming coffee dispensing measures for different coffee types.
Procedure for setting water dispensing parameters and temperature.
Explanation of the energy saving mode and its effects on machine operation.
Instructions for performing various wash cycles (Coffee, Milk, Time).
How to adjust Turbosteam parameters for milk frothing types and levels.
Guide to selecting heating levels for the cup warmer tray.
Procedure to set and adjust the coffee boiler temperature.
Instructions for draining and refilling the boiler with fresh water.
Purpose and procedure for cleaning milk and coffee circuits to ensure hygiene and performance.
Details on sequential, simultaneous, and single washing of the coffee circuit.
Importance of regular milk circuit washing to prevent blockages and leaks.
Procedure for washing the milk circuit with an external milk holder.
Details on the NSF preset automatic washing cycle for Turbo Milk machines.
Explanation of the automatic wash function for Turbo Milk machines.
Daily procedure for draining and refilling the boiler with fresh water.
Procedure for cleaning filter holders and filters at the end of the working day.
Instructions for cleaning dispensing pipes at the end of the working day.
Procedure for cleaning the machine's grille and drip basin.
Guidelines for cleaning the external bodywork of the machine.
Common problems, their causes, and solutions for immediate customer action.
Interpretation of specific error messages like 'Machine cold' and 'Service needed'.
Visual aids for water connections, wire colors, and installation steps.
Instructions for adjusting the machine's voltage by changing transformer connections.
Overview of cleaning products offered by Gruppo Cimbali for machine maintenance.
To Next Page