WIRELESS
TEMPERATURE & HUMIDITY STATION
QUICK START GUIDE
FIND FULL MANUALS, FAQS, AND MORE UNDER THE
SUPPORT TAB HERE: www.lacrossetechnology.com/S82967
MODEL: S82967
DC: 062118
POWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into an outlet, then into your
station. Optional: Insert 2-AA batteries for backup.
3. Adjust time and date settings on your station.
4. Once the Outdoor Sensor is reading to your station, place it
outside in a shaded location.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
Outdoor Sensor
TX141TH-Bv2
Temp & Humidity Station
S82967
SETTINGS
1. Hold the SET button to enter the Settings Menu.
2. Press the + or - button to adjust the values.
Hold to adjust quickly.
3. Press the SET button to confirm and move to the next item.
4. Press the LIGHT button to exit.
Pull Out
Stand
Settings Menu Order:
• Language (English, Spanish, French)
• Beep ON/OFF
• 12/24 Hour
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit or Celsius
Note: Your weekday will set
automatically after year, month,
and date are set.
AUTO DIM BACKLIGHT
1. Hold the AUTO DIM button to set Auto Dim Start and Stop
times.
2. Use the + or - button to turn the Auto Dim feature ON. Press
the AUTO DIM button to confirm and move to next item.
3. START TIME will flash. Use the + or - buttons to select your
Auto Dimmer’s starting hour. Press the AUTO DIM button to
confirm and move to next item.
4. STOP TIME will flash. Use the + or - buttons to select your Auto
Dimmer’s ending hour. Press the AUTO DIM button to confirm.
ADJUSTABLE BACKLIGHT
• Press the LIGHT button to adjust your Backlight brightness.
BACKLIGHT and your brightness level will show (OFF,1, 2, 3, 4).
Page 2
Page 3
To Next Page
Need help?
General
