La Crosse Technology WT-5360 User Manual

LA CROSSE TECHNOLOGY QUICK SET-UP INSTRUCTIONS
Make sure you start with new brand-name alkaline batteries if you are not using the A/C adapter.
The MODE/MIN button will get you to the menu options. The AL/HR or MODE/MIN buttons will
change them when they are flashing.
1. Check the polarity and install batteries into the back of clock.
2. Press and hold the MODE/MIN button to select your TIME ZONE. Adjust to your correct Time Zone
with the MODE/MIN button. Press and release SNOOZE button to advance.
3. The HOUR will be flashing. Press and release the AL/HR button to adjust the hour and the
MODE/MIN button to adjust the minutes. Press and release the SNOOZE button to advance.
4. Press and release the MODE/MIN button to adjust the YEAR. Press and release the SNOOZE button
to advance.
5. Press and release the MODE/MIN button to adjust the MONTH. Press and release the SNOOZE
button to advance.
6. Press and release the MODE/MIN button to adjust the Day of the Month. Press and release the
SNOOZE button to advance.
7. Press and release the MODE/MIN button to adjust the Weekday. Press and release the SNOOZE
button to advance.
8. A 12h or 24h will be flashing. (12h for AM/PM, 24h for military time) To change between 12h and
24h, press and release the MODE/MIN button. Press and release the SNOOZE button to advance.
9. Degrees Fahrenheit or Celsius will now be flashing; to change between Fahrenheit and Celsius press
and release the MODE/MIN button. When your choice is shown on the display, press and release the
SNOOZE button to advance.
10. Daylight Savings Time (DST) will be flashing. Most states use DST, so this should be ON.
However if your location does not use DST, use the MODE/MIN button to turn it off. Press and release
the SNOOZE button to exit the setup mode.

La Crosse Technology WT-5360 Specifications

General

Type	Clock Radio
Display Type	LCD
Snooze	Yes
Snooze Duration	9 minutes
Power Source	AC Adapter
Battery Backup	Yes
Radio	AM/FM
Time Display	12/24 Hour
Alarm	Dual Alarm
Display Features	Backlight
Weight	0.5 pounds

Summary

La Crosse Technology Quick Set-Up Instructions

Install Batteries

Check the polarity and install batteries into the back of the clock.

Select Time Zone

Press and hold the MODE/MIN button to select your Time Zone. Adjust with MODE/MIN, advance with SNOOZE.

Set Hour and Minutes

Adjust the hour with AL/HR, minutes with MODE/MIN. Press SNOOZE to advance.

Set Year

Press and release the MODE/MIN button to adjust the YEAR. Press SNOOZE to advance.

Set Month

Press and release the MODE/MIN button to adjust the MONTH. Press SNOOZE to advance.

Set Day of Month

Press and release the MODE/MIN button to adjust the Day of the Month. Press SNOOZE to advance.

Set Weekday

Press and release the MODE/MIN button to adjust the Weekday. Press SNOOZE to advance.

Set 12/24 Hour Format

Change between 12h (AM/PM) and 24h (military time) with MODE/MIN. Advance with SNOOZE.

Set Temperature Unit

Toggle Fahrenheit/Celsius with MODE/MIN. Press SNOOZE to advance.

Set Daylight Savings Time

Toggle DST ON/OFF with MODE/MIN. Press SNOOZE to exit setup mode.