24
FEATURES: (Con’t)
CONTROL PANEL, 315/317 SERIES FLO-THRU CO2 INCUBATORS:
AIR CO2
1 7
TEMPERATURE ºC
2
3
CAL
HI
TEMP SAFETY
4 TEMP CONTROL 8
5
POWER SAMPLE
6 9
1. AIR FLOWMETER: Controls the amount of
incoming air by rotating its control knob.
2. LED DISPLAY: Displays current
temperature.
3. CALIBRATION POTENTIOMETER: Using a
jeweler’s screwdriver, display can be
adjusted.
4. TEMPERATURE STATUS LAMP: Lit when
heaters are active.
5. TEMPERATURE CONTROL: Rotates to
raise or lower temperatures.
6. POWER SWITCH: Turns the unit on and off.
7. CO2 FLOWMETER: Controls the amount of
incoming CO2 by rotating its control knob.
8. HIGH SAFETY STATUS LAMP: Lights up
when high limit set point temperature is
exceeded.
9. CO2 SAMPLE INLET PORT: Used to
determine the amount of CO2 inside the
chamber.
To Next Page
Loading...