EasyManua.ls Logo

Lab31 LB-SV-KMIC01-Bv2 - Proper Usage and Handling; Installing and Using the Device; Control Button Overview (Fig. 1); Charging the Device

Default Icon
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3EN
WARNING! Never cover the charging cable
or device with cloths, curtains or any other
material in order to prevent overheating
and potential fire hazards.
Use
Prior to use, check the device for visible
external damage. Never operate the device if it
is damaged.
Do not use the device in the vicinity of
flammable materials.
Do not place the device under any mechanical
stress.
Improper use of the device could damage the
product.
Please handle the device carefully. Jolts,
impacts or falls, even from a low height, can
damage the device.
Do not attempt to disassemble or repair the
device or modify it in any manner.
The device must be serviced if it has been
damaged in any way, i.e. the charging cable/
plug is damaged, or if it does not operate
properly.
Do not use or store the device in an
environment subject to strong static electricity
or magnetic fields.
Only allow repairs to be carried out by a
qualified service centre. Qualified service
centre: after-sales department of the
manufacturer or store, which is recognised and
authorised to carry out such repairs, so that
potential hazards can be prevented. If problems
are encountered with the device, please return
it to this department.
Important information, follow these
instructions
Keep children under strict supervision to
prevent them from using the device as a toy.
Do not allow unsupervised children to clean or
maintain this device.
Only use the device in dry areas and not in the
vicinity of water, other liquids or humidity.
Do not use the device if it, the charging cable
has fallen into water or any kind of fluid.
Never immerse the device or charging cable in
water or any kind of fluid.
Warning! To prevent possible hearing
damage, do not listen at high volume for
long periods.
Cleaning:
Before cleaning the device, always disconnect
the device from the charging cable.
Do not use abrasive cleaning solvents to clean
the device.
Clean the exterior of the device with a damp
cloth.
 INSTALLING AND USING THE
DEVICE
Open the packaging carefully before taking out
the device. Make sure the device is complete
and undamaged. If any components are missing
or damaged, contact the vendor and do not use
the product. Retain the packaging or recycle it in
accordance with local regulations.
Location of the control buttons (Fig. 1)
A. Power On/O
B. Previous track
C. Next track
D. Volume up
E. Volume down
F. Play/pause
G. Voice change eect
H. Microphone volume
I. Remix
J. AUX out port
K. USB Type-C charging / AUX in port
L. LED indicator
M. LED charging indicator
Charging the device:
Carefully plug the USB Type-C connector of the
charging cable into the USB Type-C charging
port (K) of the device.
Plug the USB connector of the charging cable
into a USB port on your computer or USB
charger.

Related product manuals