These chapters in the manual are to be used by qualified, authorized technical staff.
WATER CONNECTIONS
No leaks from the connections or tubes•
FUNCTIONING
Boiler and operating pressures are normal. •
The pressure gauge is working properly. •
The self-leveling device is working properly.•
The expansion valves are working properly•
5. Installation Check-up
WARNING: AFTER INSTALLATION, CHECK TO SEE IF THE MACHINE IS WORKING PROPERLY (see the
Installation Module C)
COFFEE CIRCUIT / MILK CIRCUIT / SOLUBLES CIRCUIT
Press the • PRG (29)
key and then the icon ; choose the type of wash cycle, and follow the instructions on the touch
screen.
HOT WATER
Continuously dispense hot water •
until at least 0.5 liters of water have been dispensed
.
WARNING: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING THE
WORKER TO START USING THE MACHINE, WASH THE INTERNAL COMPONENTS ACCORDING TO THE
INSTRUCTIONS BELOW:
54
English
To Next Page
Loading...
