Lada Niva Manual - Maintenance Page 22
Before installation of the brake shoes, make sure that brake disc 5 is not damaged nor deeply
scored. Replace the disc if it is worn to a thickness below 9.5 mm.
To install the brake shoes push the pistons as deep into the cylinders as possible. When
doing so see that the protective rubber seals of the pistons are in their sockets and are not
damaged; replace the seals, if necessary.
When the pistons are pushed into the cylinders, the brake fluid level in the reservoir rises. To
prevent overflowing, remove the reservoir cap and timely remove the required amount of fluid
from the reservoir.
To Next Page
Loading...
