Lafayette Auto-Lift Parasol Cellular Shades User Manual (English)

Questions and Answers:

K
Kelly Newman MDAug 5, 2025
What to do if Lafayette Indoor Furnishing shade is not responding to remote?
- S
  summersjenniferAug 5, 2025
  If your Lafayette Indoor Furnishing shade isn't responding to the remote or wireless wall switch, the batteries in the battery wand or satellite battery pack might be low, so try replacing them. Also, ensure that the battery wand, satellite battery pack, or DC power supply is securely connected to the power cable and that the cables aren't pinched or caught in the headrail or installation brackets. Resetting the shade may also help.
T
Tamara GrimesAug 12, 2025
Why is my Lafayette Indoor Furnishing shade operating slowly?
- V
  Victoria ThompsonAug 12, 2025
  If your Lafayette Indoor Furnishing shade is operating slowly or isn't raising or lowering completely, the batteries in the wand or satellite battery pack could be low, so try replacing them. Also, check that the battery wand, satellite battery pack, or DC power supply is securely connected to the power cable, ensuring the cables are not pinched. Make sure the fabric stacks up evenly into the headrail. Resetting the stop positions may also help.
B
Brandi Davila DDSAug 19, 2025
How to fix Lafayette Auto-Lift Parasol Cellular Shades shade that raises unevenly?
- Y
  ycollierAug 19, 2025
  If your Lafayette Indoor Furnishing shade raises or lowers unevenly, or the bottom rail is uneven when fully raised, lower the shade completely to allow it to self-correct skewing. Check that the headrail and installation brackets are level and aligned; shim the installation brackets to level the headrail if needed. Adjust the bottom rail.
J
jennifervaughnAug 27, 2025
What to do if Lafayette Indoor Furnishing shade will not fit into the installation brackets?
- T
  tarajacksonAug 27, 2025
  If the Lafayette Indoor Furnishing shade won't fit into the installation brackets, check that the installation brackets are level and aligned. Adjust or shim to level if necessary. Ensure the heads of the mounting screws are flush against the installation bracket. Make sure the shade fabric is not caught between the installation bracket and the headrail. Check that the headrail is completely inserted into the installation brackets.