DUO2- user’s manual user’s manual - DUO2
3.6 System Setting
There contain all system set
Country Setting
Press key to change the country
OSD Language
Press key to change the OSD Language.
TV Format
Press key to change the TV Format.
Video Output
If we connect HDMI interface, we can press key.
TV Resolution
On the basis of the Video Output choice, we can press key to change the TV resolution.
Digital Audio Output
Press key to change the LPCM or RAW format.
Time Zone
Press key to change the Time Zone.
PWR Unit
Press key to change the PWR unit.
Flashlight
Press key to switch Flashlight on/off.
12V
Press key to switch DC 12V output on/off.
Note: If the shell is no 12V interface, without this feature
KB-BackLight
Press
key to switch delay time of back light.
Set Location
Press or ok key to set location longitude or latitude
Location: we can press to change the city, then auto select longitude and latitude.
Longitude: we can use number key input value then select west or east.
Latitude: we can use number key input value then select south or north.
Upgrade
Will update the le into the U disk; then insert the machine; press ok key to update interface, use the direction key
to select update le. Press ok key to update.
Warning: During the upgrade processing, do not power off or pull out the U disk; otherwise will damage the machine
software, can’t boot.
57
58
To Next Page
Loading...