METAL CUTTING BLADE /PLASTIC BLADE (KNEADING BLADE)
*
The metal cutting blade is used for chopping hard foods, such as
onions, herbs, garlic, nuts, almonds, etc. Do not grind extremely
hard foods, such as ice cubes, coffee beans, nutmeg, etc.
*
The plastic blade is used for kneading dough, such as pastry and
pie crusts, bread dough, buns, etc.
*
To install the cutting blade in the appliance, place it at the bottom
of the bowl, lock the lid in place, and twist the hand blender’s
motor unit until it locks into its adaptor on the lid.
250
500
750
1000
1250
1500
2
ON
MAX
1
*
Turn on the appliance and gradually insert the foodstuffs through
the feeder tube; never insert your ngers or another utensil.
*
During the blender’s operation, make sure to hold the motor unit
in place by holding it with one hand while holding the chopping
bowl with the other.
*
After use, turn off the motor and disconnect the appliance and dismantle
the appliance, taking care not to cut yourself with the metal cutting blade.
45
To Next Page
Loading...