K. Battery charge interface.
L. LED indicator. White light flashes when the hopper opens.
M. LED indicator. Blue light flashes when hook drops.
N. LED indicator. It flashes when the hook or hopper on the left side
moves.
O. LED indicator. It flashes when the hook or hopper on the right side
moves.
5 Charging Method
One Charger is for Ni-MH batteries used in the remote, 15V500mA
Don’t use the wrong chargers for the wrong batteries.
1. Charger for Ni-MH batteries
When the red light of remote flashes, charge the Ni-MH batteries to
avoid contact failure. Before charging make sure all the batteries are well
placed within the remote, and the remote is switched off. When the red
light turns to green (which should take
around 3 to 4 hours) the
batteries are fully charged.
To Next Page
Loading...