lamber L24-ek-plus - Page 35

Stand B
y
YES To confirm
NO
If you turn the machine on Stand By
stops after 1 hour and sets the values
of rinse temperature on 60°C. The display will show the word ECONOMY
Soft-start
SI
To confirm
Soft
-
start
SI
T
o con
fi
rm
NO
Regeneration SI
To confirm
(Water softener) NO
Filling time Drain time To confirm
regeneration (30÷90")
Cycle numbe
r
Number of cycles To confirm
regeneration (0÷15") With "0"
the regenerating is
enabled
Economy thermosta
t
SI To confirm
NO
SERVICE Number of cycles To confirm
Number of cycles (0÷99999) With "0"
the SERVICE is
enabled
At the end of the programming operations
Exi
t
the machine turns off. Press push-button "A"
for 1 second to turn the machine on