LAMBORGHINI R3 EVO 85 - Page 3

III
CONTENTS
0 - INTRODUCTION
0.1 - Introduction 0-2
0.1.1 - Safety notes 0-2
0.1.2 - General safety 0-2
0.1.3 - Precautions to use during performance of the work 0-3
0.1.4 - Lifting instructions 0-4
0.1.5 - Tightening torques 0-5
0.1.6 - Thread lock, adhesive, sealant and lubrication materials 0-8
0.1.7 - Unit of measurement conversion table 0-10
0.2 - Introduction - Engines 0-11
0.2.1 - Safety notes 0-11
0.2.2 - General safety 0-11
0.2.3 - Precautions to use during performance of the work 0-12
0.2.4 - Lifting instructions 0-13
0.2.5 - Tightening torques 0-14
0.2.6 - Thread lock, adhesive, sealant and lubrication materials 0-17
0.2.7 - Unit of measurement conversion table 0-19
0.3 - Tightening torques 0-20
0.3.1 - General information 0-20
0.3.2 - Tightening classes and categories 0-20
0.3.3 - Coefcient of friction 0-20
0.3.4 - Tightening torques 0-21
0.4 - Tightening torques for nuts and bolts of electrical connections 0-30
0.4.1 - Standard tightening torques 0-30
0.4.2 - Battery terminal tightening torques 0-30
0.4.3 - Starter motor tightening torques 0-31
0.4.4 - Alternator tightening torques 0-31
0.5 - Wheel rim to hub screws and nuts tightening torques 0-32
0.6 - Installation of solenoid valves and cartridge valves 0-33
0.6.1 - Installation 0-33
0.6.2 - Solenoid valve tightening torques 0-33
0.6.3 - Cartridge valve tightening torques 0-34
0.7 - Installation of quick couplers 0-35
0.7.1 - Table of tightening torques 0-35
10 - TECHNICAL CHARACTERISTICS
10.1 - Engine 10-2
10.1.1 - Components of the 2012 2V UPS engine 10-2
10.1.2 - Test data and settings 10-8
10.1.3 - Tightening requirements 2012 2V UPS engine 10-9
10.2 - Transmission 10-13
10.2.1 - Transmission (R3 EVO 110 -> 1001) 10-13
10.2.2 - Transmission (R3 EVO 85 -> 16001) 10-23
10.2.3 - Transmission (R3 EVO 85 -> 20001) 10-32
10.2.4 - Transmission (R3 EVO 100 -> 16001) 10-43
10.2.5 - Transmission (R3 EVO 100 -> 20001) 10-52
10.2.6 - Transmission (R3 EVO 110 -> 5001) 10-65
Find manuals at https://best-manuals.com