EasyManua.ls Logo

Lambretta V125 Special 2018 - User Manual

Lambretta V125 Special 2018
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL | ENG
mod.# V125 Special

Questions and Answers

  • C
    Christine MartinezAug 2, 2025
    Why Lambretta V125 Special 2018 Motorcycle engine does not start when using electric start?
    • J
      Jessica RothAug 2, 2025
      If your Lambretta Motorcycle engine fails to start when you push the electric start button, several issues could be the cause. First, the battery might be discharged, so try charging it. Also, check the battery charging and ensure the generator works correctly. Other potential problems include a blown fuse (check the fuses), a defective starter relay (check the starter relay), or a defective starter motor (check the starter motor).
  • C
    Chad PowersAug 7, 2025
    What to do if Lambretta Motorcycle engine turns but does not start?
    • A
      Amanda FriedmanAug 7, 2025
      If your Lambretta Motorcycle engine turns but doesn't start or stalls, consider these potential causes: a blown fuse (check the fuses), a contaminated spark plug (clean the spark plug), or a failure in the ignition system (check the ignition system). If the idle speed is not set correctly, contact your dealer to identify the failure.
  • T
    thompsonyeseniaAug 13, 2025
    What to do if Lambretta V125 Special 2018 Motorcycle engine stalls?
    • R
      Robin SimonAug 13, 2025
      If your Lambretta Motorcycle engine stalls, possible causes include a worn wire harness (check the wiring harness), contact problems in a plug (check the plugs of the wiring harness), or an empty fuel tank (refill gasoline). Also, check for a problem with the fuel pump (check the fuel pump) or fuel leakage (check the fuel circuit).
  • K
    kaylaheathAug 17, 2025
    How to improve poor engine power on Lambretta V125 Special 2018 Motorcycle?
    • B
      brownrobertAug 18, 2025
      If your Lambretta Motorcycle engine power is poor, it could be due to a contaminated air filter (clean the air filter) or a failure in the fuel system (check the fuel system). Also, the issue might be related to the ignition system (check the ignition system, contact your dealer) or valve clearance that is too little (contact your dealer to adjust the valve clearance).
  • N
    Nancy ReynoldsAug 22, 2025
    Why Lambretta V125 Special 2018 Motorcycle has to high oil consumption?
    • A
      Anita WoodsAug 23, 2025
      Excessive oil consumption in your Lambretta Motorcycle can stem from several factors. The engine oil level might be too high, in which case you should bleed the oil system to the specified level. Other possible causes include a worn cylinder/piston (contact your dealer to replace the cylinder/ piston) or an engine ventilation system that isn't working correctly (check the engine ventilation system).
  • D
    debra01Aug 27, 2025
    What does it mean when the engine warning light is on in Lambretta Motorcycle?
    • A
      Anthony JohnsonAug 27, 2025
      If the engine warning light is illuminated on your Lambretta Motorcycle, it indicates a failure in the fuel injection/electric system. Contact your dealer to identify the failure.

Summary

Warranty sheet

Introduction

Important manual information

Safety information

Safe riding

Guidelines for safe operation, including pre-checks and load limits.

Protective clothing

Recommendations for wearing appropriate safety gear to prevent injuries.

Modifications

Information on vehicle modifications and their impact on safety and warranty.

Loading and accessories

Advice on adding cargo or accessories to the vehicle and their effects.

Loading

Specifies the maximum load capacity for the vehicle and guidelines for loading.

Accessories

Guidance on selecting and installing accessories, including OEM and non-OEM options.

Gasoline and exhaust gas

Safety precautions related to fuel handling and exhaust fumes.

Other safe-riding points

Additional safety tips for riding, including signaling and weather conditions.

Description of the vehicle

Side view

Visual identification of vehicle parts from the side view.

Controls and instruments

Overview of the vehicle's controls and dashboard instruments.

Consumer information

Vehicle identification number (VIN)

Location and importance of the VIN for identification and registration purposes.

Instrument and control functions

Main switch

Operation of the main switch for ignition, lighting, and steering lock.

Dashboard unit

Explanation of the various indicators and gauges on the dashboard.

Handlebar switches - Left

Controls located on the left handlebar, including lights, signals, and horn.

Handlebar switches - Right

Controls on the right handlebar, including start button and SET button.

Engine start safety switch

Functionality and importance of the engine start safety switch.

Brake lever

Description and operation of the front and rear brake levers.

Fuel tank cap

Instructions for removing and installing the fuel tank cap.

Fuel

Information on fuel type, capacity, and precautions during refueling.

Catalytic converter

Details about the catalytic converter and related safety precautions.

Seat

Instructions on how to open and close the vehicle seat.

Storage Luggage Box

Information on the location and capacity of the storage luggage box.

Rear Carrier

Details about the rear carrier, including its load limit.

Side stand

Operation and safety checks for the side stand.

Main stand

Instructions for using the main stand and ensuring vehicle stability.

Combined brake system (CBS)

Explanation of how the combined brake system operates for safety.

Pre-operation checks

Pre-operation check list

A comprehensive checklist of items to verify before operating the vehicle.

Operation and important riding points

Starting the engine

Step-by-step guide for starting the engine safely.

Starting off

Procedure for safely moving the vehicle from a standstill.

Acceleration; Deceleration

How to control speed using the throttle grip.

Braking

Techniques for effective and safe braking using front and rear brakes.

Parking

Safe procedures for parking the vehicle, including engine shutdown.

Engine break in

Guidelines for the initial break-in period to ensure engine longevity.

Periodic maintenance and minor repair

Owners tool kit

Details on the location and contents of the owner's tool kit.

Battery cover

Instructions for removing and installing the battery cover for maintenance.

Spark plug

Procedure for checking and replacing the spark plug.

Engine oil

Guide to checking and maintaining the engine oil level.

Final transmission oil

Steps for changing the final transmission oil.

Air filter

Instructions for replacing or cleaning the air filter.

ECU

Information regarding the Engine Control Unit and its adjustments.

Throttle cable free play

Checking and adjusting the free play in the throttle cable.

Tires

Key points for maximizing tire performance, durability, and safety.

Tire air pressure

Importance of checking and adjusting tire air pressure before each ride.

Tire inspection

Visual checks for tire tread depth, sidewall condition, and wear indicators.

Rims

Guidelines for inspecting and maintaining wheel rims for safety.

Brake lever free play

Checking for and addressing free play in the brake levers.

Brake pads

Procedure for checking brake pad wear using the indicator notch.

Brake fluid

Instructions for checking and refilling brake fluid.

Cables

Checking and lubricating control cables for smooth operation.

Throttle grip and cable

Checking throttle grip operation and lubricating the cable.

Main stand; Side stand

Checking operation and lubricating pivots of the main and side stands.

Front fork

Checking the condition and operation of the front fork suspension.

Steering

Importance of checking steering bearings for safe operation.

Wheel bearings

Procedure for checking front and rear wheel bearings.

Battery

Information on the maintenance-free battery and its handling precautions.

Charge the battery

Guidelines for charging the vehicle battery.

Store the battery

Instructions for storing the battery during long periods of non-use.

Clean the battery

Steps for cleaning the battery terminals and connections.

Fuses

Location of the fuse holder and procedure for replacing fuses.

Troubleshooting

Troubleshooting chart

A guide to diagnose and resolve common vehicle failures and issues.

Clean and storage

Clean the vehicle

Proper methods for cleaning the vehicle to maintain its appearance and performance.

Cleaning after normal use

Steps for cleaning the vehicle after regular use.

Cleaning after riding in the rain, near the sea or on salt-sprayed roads

Special cleaning procedures for vehicles exposed to corrosive conditions.

After cleaning

Final steps after cleaning, including drying and waxing.

Storage

General guidelines for storing the vehicle.

Short-term (for a few days)

Recommendations for storing the vehicle for short periods.

Long-term (for weeks)

Detailed instructions for preparing and storing the vehicle for extended periods.

Specifications

Dimensions

Physical dimensions of the vehicle.

Engine

Technical specifications of the vehicle's engine.

Engine oil

Specifications for engine oil viscosity and quantity.

Transmission oil

Specifications for transmission oil viscosity and quantity.

Fuel

Fuel type and capacity specifications.

Air filter

Specifications for the air filter type.

ECU

Manufacturer and model of the Engine Control Unit.

Spark plug

Specifications for the spark plug type and gap.

Clutch

Type and operation of the clutch system.

Chassis

Specifications for the vehicle's chassis type.

Tire

General tire specifications.

Front tire

Specifications for the front tire, including rim and pressure.

Rear tire

Specifications for the rear tire, including rim and pressure.

Brake system

Overview of the front and rear brake systems.

Front brake

Details on the front brake system, including type, size, and operation.

Rear brake

Details on the rear brake system, including type, size, and operation.

Suspension

Specifications for front and rear suspension systems.

Front suspension

Details on the front suspension type and shock absorber.

Rear suspension

Details on the rear suspension type and shock absorber.

Electric system

Specifications for the vehicle's ignition, charging, and battery systems.

Battery

Specifications for the vehicle's battery voltage and capacity.

Lamps

Details on the vehicle's lighting systems.

Fuse

Specifications for the vehicle's fuses.

Warranty information

Service and maintenance

Important information

General guidelines on maintenance intervals and warranty compliance.

Maintenance schedule

Required inspection intervals for various vehicle components.

Service record

Section for recording vehicle maintenance history and service dates.

Space for notes

Lambretta V125 Special 2018 Specifications

General IconGeneral
Displacement124.7 cc
Fuel SystemElectronic Fuel Injection
CoolingAir-cooled
Front SuspensionTelescopic fork
Rear SuspensionDual shock absorbers
Front BrakeDisc
Bore x Stroke52.4 mm x 57.8 mm
IgnitionCDI
Starting SystemElectric
Frame TypeSteel tube
Seat Height770 mm
Wheelbase1, 340 mm
Engine Type4-stroke, single cylinder
Torque9.2 Nm @ 7000 rpm
Rear Tire120/70-12
Fuel Capacity6.0 liters
Height1, 130 mm
Power7.5 kW (10.2 hp) @ 8500 rpm
TransmissionAutomatic CVT
Front TireTubeless 110/70-12