To Next PageTo Next Page
Need help?Do you have a question about the Laminar Research Van's RV-10 and is the answer not in the manual?
General| Brand | Laminar Research |
|---|---|
| Model | Van's RV-10 |
| Category | GPS |
| Language | English |
Assigns numpad key '0' to the Parking Brake view for quick access.
Assigns numpad key '1' to the Left Door Handle view for quick access.
Assigns numpad key '5' to the Throttle Quadrant view for quick access.
Assigns numpad key '2' to the Right Door Handle view for quick access.
Assigns numpad key '8' to the Pilot View Forward for quick access.
Assigns numpad key '7' to the G1000 PFD, Audio & Electrical Panels view.
Assigns numpad key '4' to the G1000 MFD, Autopilot & External Lights Panel view.
Assigns numpad key '9' to the Left Glance View for quick access.
Assigns numpad key '8' to the Cabin Overhead Lighting view for quick access.
Assigns numpad key '6' to the Right Glance View for quick access.
Describes operation of toggle and rocker switches using mouse clicks.
Explains lever operation via peripheral devices or mouse dragging.
Details how to operate rotary dials using mouse clicks, drags, or mouse wheel.
Explains operation of push buttons and guarded switches using the mouse.
Describes how control stick and rudder pedals are operated, including assignments.
Assigns joystick lateral axis to 'Roll' and vertical axis to 'Pitch' commands.
Assigns the throttle lever to the 'Throttle' property in X-Plane.
Assigns the prop lever to the 'Prop' property for variable pitch optimization.
Assigns the mixture lever to the 'Mixture' property for fuel-air ratio control.
Assigns a peripheral lever to the 'Flaps' property for flap deployment control.
Assigns the yaw axis of rudder pedals to the 'yaw' property in X-Plane.
Assigns pedal toe-tipping motion to 'left toe brake' and 'right toe brake' properties.
Assigns joystick buttons/axes to 'Pitch trim up', 'down', and 'takeoff' properties.
Identifies and describes controls on the overhead panel, including lighting.
Explains operation of MASTER BATTERY, ALT, AUTO PILOT, AVIONICS MASTER, FUEL PUMP, PITOT HEAT switches.
Describes how to engage the engine starter motor for engine start.
Details operation of NAV LIGHTS, LANDING LIGHTS, TAXI LIGHTS, and STROBE LIGHTS.
Explains how to set and release the parking brake lever.
Introduces the main flight controls: Control Stick, Rudder Pedals, Toe Brakes, and Flap Lever.
Describes the Control Stick's function for pitch and roll control.
Explains the Rudder Pedals' function for yaw control.
Details the Toe Brakes' function for left and right wheel braking.
Describes the Flap Lever's three positions: No Flap, Half Flap, and Full Flap.
Explains the Garmin G1000 PFD, its functions, and information displayed.
Details the Garmin G1000 MFD, its flight-plan input, navigation, and EIS functions.
Describes controls for managing active audio sources for COM and NAV radios, DME, and ADF.
Explains the backup PFD's role in providing redundancy for the G1000 PFD.
Engages Track mode for steering according to selected heading.
Levels the aircraft at the current altitude for altitude hold.
Engages NAV mode to follow flight plan, ILS, or VOR radial.
SEL selects altitude, REV follows ILS back-course.
VNAV engages mode for vertical flight plan component; Vertical Speed controls ascent/descent.
Rotaries adjust altitude and heading bug for autopilot operations.
AP button engages autopilot; GPSS steers to next waypoint.
Explains the throttle lever's function for controlling engine torque (power).
Describes propeller lever use for setting RPM on a constant speed propeller.
Details the mixture lever's role in altering fuel-air ratio for engine performance.
Describes DOME and DIMMER rotaries for controlling cockpit lighting intensity.
Explains how to select fuel tanks (Left, Right, or OFF) for engine supply.
Toggles the NAV radio Morse code identifier ON/OFF.
Displays active and standby frequencies for NAV1 and NAV2 radios.
Displays the aircraft's attitude relative to the horizon and Flight Director.
Shows the next waypoint, distance, and bearing in the flight plan.
Features active and standby frequencies for COM1 and COM2 radios.
Toggles COM frequency and audio ON/OFF for selected COM radio.
Used to switch between COM1/COM2 and adjust standby frequency.
Sets altimeter pressure and adjusts CDI for navigation.
Displays altitude, reference altitude, selected altitude, and vertical speed.
Rotary controls map range (zoom) and panning for display.
Keys for direct-to, flight plan page, clearing entries, menus, approaches, and confirming selections.
Activates flight plan cursor and manages waypoint input and selection.
Displays heading, adjustable heading bug, and course indicator.
Context-driven keys that change function based on pilot action.
Selects Autopilot Selected Altitude in increments of 1,000 and 100 feet.
Controls autopilot modes and operations.
Controls the heading bug, synchronizing it with current heading.
Displays airspeed in knots with color-coded speed ranges.
Switches between NAV1/NAV2 and adjusts standby NAV frequency.
Toggles between active and standby COM or NAV radio frequency.
Toggles the NAV radio Morse code identifier ON/OFF.
Displays active and standby frequencies for NAV1 and NAV2 radios.
Displays aviation and geographic data, including airports, VORs, and terrain.
Shows navigation leg information like ground speed, track, and estimated time enroute.
Features active and standby frequencies for COM1 and COM2 radios.
Toggles COM frequency and audio ON/OFF for selected COM radio.
Used to switch between COM1/COM2 and adjust standby frequency.
Sets altimeter pressure and adjusts CDI for navigation.
Rotary controls map range (zoom) and panning for display.
Keys for direct-to, flight plan page, clearing entries, menus, approaches, and confirming selections.
Activates flight plan cursor and manages waypoint input and selection.
Context-driven keys that change function based on pilot action.
Selects Autopilot Selected Altitude in increments of 1,000 and 100 feet.
Controls autopilot modes and operations.
Controls the heading bug, synchronizing it with current heading.
Switches between NAV1/NAV2 and adjusts standby NAV frequency.
Toggles between active and standby COM or NAV radio frequency.
Displays critical engine and electrical system readouts and gauges.
Ensures aircraft is ready for flight by checking control surface movement.
Ensures cabin door is closed and parking brake is engaged before starting.
Sets fuel selector as required and turns the battery master ON.
Verifies the amount of fuel available for the flight.
Sets mixture to full rich, cycles fuel pump, and sets throttle to idle.
Turns strobes ON, starts the engine, and powers alternator and avionics master.
Sets elevator trim for takeoff using peripheral device properties.
Confirms proper operation of pitch, roll, and yaw controls.
Sets strobes, navigation lights, and taxi lights as required.
Sets transponder to ON and releases the parking brake.
Sets flaps to 50% and sets the altimeter.
Turns landing lights ON and taxi lights OFF.
Sets the transponder to ALT mode.
Retracts flaps and sets throttle as required for climb.
Turns landing lights OFF and leans mixture as required.
Sets the altimeter for cruise altitude.
Sets altimeter and turns landing lights ON.
Sets the mixture to full rich for landing.
Sets flaps as required for the landing approach.
Sets flaps to 100% for landing.
Retracts flaps and sets transponder to ON.
Sets throttle to idle, parking brake ON, and mixture to cut off.
Turns fuel selector OFF and shuts down avionics, alternator, and battery.
