Gerätesicherheit
Equipment Safety
Sécurité de l'appareil
Kap. 2
Equipment Safety
• The control drives are according to recognized rules of the
technology manufactured quality products and the manufacturer in
safety-relevant perfect condition left!·
• For the preservation of the safety-relevant perfect condition it is
compellingly necessary that mechanic/users adheres strict to the
manufacturer data from this documentation and has an appropriate
vocational qualification!·
• The control drives may be used only for that its design
corresponding purpose!
• Likewise the control drives may be operated only according to the
values given in the technical data!
WARNING
Guarantee that from the assembly, start-up cannot result or
from the test operation at the control drive a danger for
humans, environment or devices / machines / plants!
• Before the assembly of the control drive the control member is to be
examined for operation smoothness!·
• The control drives may neither at defective inlets and/or flanged on
components installed, in enterprise taken, nor tuning at them may be
made! The same applies also to damaged control drives!
• After conclusion of the assembly and/or the attitudes the correct
function and the adherence to the end positions are to be examined
if necessary!·
• Likewise the function of optional components is to be examined!
To Next Page
Loading...