111
6 Operating Control and Displays
1. Click ’Key’ icon in the bottom left .
NOTICE
If a USB-CAN module is present, the serial number ’Systec SN’ is displayed
(in this case 178108). If there is no USB-CAN module connected or available, there is no serial
number displayed. Entries cannot be made.
2. Enter activation key consisting of 16 characters.
If the code is accepted, the corresponding software level is displayed, e.g. ’end customer’
level.
The code is stored in the configuration file of the software. After starting the software sub-
sequently the last valid corresponding code (level) is loaded automatically as soon as a
connection is set up to a USB-CAN module.
6.3.2 Offline/Online
The software generally distinguishes between two operating modes:
• Offline
• Online
To Next Page
Loading...
