114
6 Operating Control and Displays
5. Select device you want to establish a connection with and press OK to confirm.
The software starts to establish a connection.
On display ’Set online’ orange and green progress bars are displayed showing status of
synchronisation of PC’s data with data of the connected device.
Initial programming of a new device
Enter the customer ID for the new device.
1. Select Access Rights menu.
The drop-down menu opens.
2. Select Change customer abbrev. command.
The Change customer abbreviation (and password level 2) opens.
Fig. 6-18 Reading data
Fig. 6-19 Access rights menu
Fig. 6-20 Change customer abbreviation
To Next Page
Loading...
