116
6 Operating Control and Displays
1. Select ’BurnerTronic’ menu.
The drop-down menu opens.
2. Select parameters sub menu.
3. Select ’All’ function.
The ’All’ parameter window opens.
Fig. 6-24 All Parameters
4. Select parameter group 5 (System).
You can now set properties for UI300 User Interface.
NOTICE
For changes in parameters of parameter group 5 and P 40 - P 68 no additional confirmation
is necessary.
NOTICE
Parameter group 10 ’Maintenance’ is without function at present.
Fig. 6-23 Parameter sub menu
To Next Page
Loading...
