117
6 Operating Control and Displays
NOTICE
Parameter groups 15 to 35 were described in relation to corresponding system options.
ENTER and change values
1. Select the parameter value by double-clicking.
Alternatively, use arrow keys to move up and down to the required value.
2. Press ENTER to confirm your selection.
3. Change value by clicking on ▲ or ▼fields or via up/down arrow keys on your keyboard.
4. Press ENTER to confirm or select a different parameter.
5. You can find a description of the parameters in the document ’Supplementation of para-
meter list for commissioning process’ (DLT1204)
6. Activate new settings by interrupting power supply and restarting BT300.
Control Parameters
NOTICE
The parameters of release level 1 must be protected by a password against unauthorised
changes. This password must differ to the default settings.
For setting the control parameters the LSB Remote Software is providing special input win-
dows. According to the access level functions can be activated/deactivated and values can be
edited within these windows.
Call up windows through parameter sub menu.
Fig. 6-25 Parameter sub menu
To Next Page
Loading...
