Lamtec BT300 BurnerTronic - Read out Faults

120
6 Operating Control and Displays
Fig. 6-29 Window for setting correction parameters
NOTICE
You will find settings of the CO/O
2
control in the commissioning supplement for "Integrated
CO/O
2
control", print no. DLT1207.
6.3.3 Read Out Faults
1. From the ’BurnerTronic’ menu, select the sub menus ’Histories’ and ’Fault history’.
The window for selecting the fault history opens.
2. Select the ’Fault history’ function.
A window containing the last ten faults opens.
Fig. 6-30 Read faults