153
6 Operating Control and Displays
6.3.7.4 Options
In menu path ’Options’ it is possible to
• flash the system memory of the remote device
• connect and disconnect LSB module
• change LSB remote software language
• enter activation code for LSB remote software
Flash DLL client
1. Click in menu on ’Tools’ >> ’Flash Tool’
The window ’Flash DLL Client’ opens.
For more information see chapter 7.2 Firmware Update BT300 and chapter 7.3 User Interface
Firmware Update.
Fig. 6-77 Menu options
Fig. 6-78 Flash DLL client
To Next Page
Loading...
