196
8 Options
8.2.4 Technical Data DFM300
Fig. 8-35 Dimensions DFM300
General data
Power supply 24 VDC
Power supply for
230/115 V in/outputs
230 V +10/-15 V, 47 ... 63 Hz
120 V +10/-15 V, 47 ... 63 Hz
Current consumption 140 mA
Housing PVC or Polyamide 6.6 (panel: polycarbonate)
Dimensions (HxWxD) max. 65x70x95 mm (2.56"x2.76"x3.74" in)
Weight 79 g (0.17 lb)
Flammability UL-94 V0 (panel: UL-94 V2)
Mounting position as desired
Installation TS35 mounting rail as per EN 50022 or TS32 as per EN 50035
Connection cross section 2.5 mm
2
(13 AWG)
Operating conditions
Altitude above sea level
2000 m NHN Without restriction
2000 m < z 5000 m NHN Use possible with the following restrictions:
- Reduction of the maximum ambient temperature according to
the diagram
"Temperature derating DFM300 for operation >2000m NHN"
- Power supply 120 VAC
- Units for 230 VAC not approved for use > 2000 m
Environmental Conditions
Operation Climatic conditions Class 3K5 according to DIN EN 60721-3
Mechanic conditions Class 3M5 according to DIN EN 60721-3
Temperature range -20 ... +60 °C (-4 ... +140 °F)
(condensation is prohibited)
Transport Climatic conditions Class 2K3 according to DIN EN 60721-3
Mechanic conditions Class 2M2 according to DIN EN 60721-3
To Next Page
Loading...
