203
8 Options
You can set LSB family by DIP switch 2-3.
Select sensor input with DIP switch 4 - 7 for acknowledgement and range of values settings.
DIP switch 2 DIP switch 3 LSB family
001
012
103
114
DIP switch 4 DIP switch 5 DIP switch 6 DIP switch 7 Input/Value range
0 0 0 1 Namur sensor 600 - 7200 Imp/Min
0 0 1 0 Namur sensor 300 - 3600 Imp/Min
0 1 0 1 3-wire sensor 600 - 7200 Imp/Min
0 1 1 0 3-wire sensor 300 - 3600 Imp/Min
1 0 0 0 current input 0 - 20mA
1 0 0 1 current input 4 - 20mA
DIP switch 8
0 0 - 20 mA setpoint output for frequency converter
1 4 - 20 mA setpoint output for frequency converter
8.3.1 DIP Switch
You can configure settings of VSM300 using DIP switches.
Functions of DIP switches
You can activate or deactivate the LSB terminating resistor by DIP switch 1.
DIP-Switch 1
1 LSB terminating resistor activated
0 LSB terminating resistor deactivated
To Next Page
Loading...
