EasyManua.ls Logo

Lamtec BT300 BurnerTronic - 8.4 Expansion Module for LSB - LEM100

Lamtec BT300 BurnerTronic
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
208
8 Options
8.3.4 Technical Data VSM100
Fig. 8-43 Dimensions VSM100
General data
Power supply 24 VDC +10/-15 % SELV
Current consumption 60 mA
Housing Polyamide 6.6 (panel: polycarbonate)
Dimensions (HxWxD) 65x70x35 mm (2.56"x2.76"x1.38" in)
Weight ca. 80 g (0.18 lb)
Flammability UL-94 V0 (panel: UL-94 V2)
Mounting position as desired
Installation TS35 mounting rail as per EN 50022
Connection cross section 2.5 mm
2
(13 AWG) (plugged LSB terminals: 0.5 mm²/20 AWG)
Speed setpoint output 0/4 ... 20 mA
Max. load 800
Resolution 1000 digit
Short-circuit resistant yes, unlimited
Speed setpoint output 0 ... 10 V
Max. output current 10 mA
Resolution 1000 digit
Short-circuit resistant yes, unlimited
Speed feedback input 0/4 ... 20 mA
Load 150
Resolution 1000 digit
Overload protection protection against accidental application of voltages up to 28 V
Digital speed feedback input
Suitable sensors optionally 2-wire sensors as per DIN EN 60947-5-6 (Namur) or 3-wire
sensors with PNP output (switching against +24 V)
Frequency range 300 ... 7200 pulses/minute (recording range configurable)

Table of Contents

Related product manuals