210
8 Options
8.4.2 LEDs
LEM100 has 2 LED which should be connected as described below:
8.4.3 Electrical Connection
NOTICE
You will find wiring, cable length and definition of the interface in the respective documentation
of the field bus systems:
LAMTEC SYSTEM BUS LSB – print no. DLT6095
PROFIBUS – print no. DLT6100
LED Colour Relevance
PWR green ON: Device initialized
CAN-Traffic green OFF: CAN Controller in Bus OFF. No communication possi-
ble.
Blinking/ON: CAN is ready to operate, communication in
progress
DC-Supply (low voltage)
CAN/LSB
CAN interface from BT300
To Next Page
Loading...
