212
8 Options
8.4.4 Technical Data
Fig. 8-45 Dimensions LEM100
General data
Power supply 24 VDC -10/+15 % SELV
Current consumption 480 mA (60 mA internal consumption)
Housing Polyamide 6.6 (panel: polycarbonate)
Dimensions (HxWxD) 65x70x50 mm (2.56x2.76x1.97" in)
Weight approx. 200 g (0.44 lb)
Flammability UL-94 V0 (panel: UL-94 V2)
Mounting position as desired
Installation TS35 mounting rail as per EN 50022
Connection cross section 2.5 mm
2
(13 AWG) (plugged LSB terminals: 1.5 mm² (15 AWG)
24 VDC output
Rated voltage 24 VDC
Output current ca. 420 mA
Power consumption (IN/OUT) 11,5 W / 10 W
Short-circuit resistant yes, unlimited
LAMTEC SYSTEM BUS
Bit rate 125 kbit/s
Termination Termination: integrated, switched by DIP switch
Environmental Conditions
Operation: Climatic conditions Class 3K5 according to DIN EN 60721-3
Mechanic conditions Class 3M5 according to DIN EN 60721-3
Temperature range -20 ... +60 °C (-4° ... +140 °F)
(condensation is prohibited)
Transport: Climatic conditions Class 2K3 according to DIN EN 60721-3
Mechanic conditions Class 2M2 according to DIN EN 60721-3
Temperature range -20 ... +70 °C (-4 ... +158 °F)
(condensation is prohibited)
Storage: Climatic conditions Class 1K3 according to DIN EN 60721-3
To Next Page
Loading...
