68
5 Assembly
5 Assembly
NOTICE
To mount the BT300 basic unit, use screw fittings with an M4 thread (UNC32) and a maximum
tightening torque of 1.8 Nm for fastening all four fixing points. Keep in mind that housings have
improved mechanical stability when connected on surrounding contact surfaces. Generally
connect to an even mounting surface.
Fig. 5-1 BT300 Front view Fig. 5-2 BT300 Side view
All support points must be set on a flat surface!
Fig. 5-3 BT300 Bottom view
To Next Page
Loading...
