CHECKING AND RESTORING TYRE
PRESSURE
The compressor can also be used to check and if
necessary top up the tyre pressure. Release quick
connector A fig. 123 and connect it directly to
the tyre to be inflated.
REPLACING THE BOTTLE
Proceed as follows:
❒ disconnect connection A fig. 124;
❒ turn the cylinder to be replaced anticlockwise
and raise it;
❒ fit the new cylinder and turn it clockwise;
❒ connect connection A to the cylinder and insert
the transparent pipe B into its housing.
fig. 123
L0F0180
fig. 124
L0F0008
167
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
To Next Page
