Lancia Ypsilon - Page 179

REAR FOG LIGHT
To change the bulb, proceed as follows:
❒ working from inside the bumper, turn the bulb
holder unit A fig. 136 by a 1/4 turn;
❒ extract the bulb and replace it;
❒ refit the new bulb then reinsert the bulb holder
in its housing.
WARNING
Before replacing bulb, wait for the
catalytic converter to
cool down:
RISK OF BURNS!
REVERSE LIGHT
To change the bulb, proceed as follows:
❒ working from inside the bumper, turn the bulb
holder unit B fig. 136 by a 1/4 turn;
❒ extract the bulb and replace it;
❒ refit the new bulb then reinsert the bulb holder
in its housing.
fig. 136
L0F0219
177
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX