22
Shutting Down and
Cleanup
STEP 1: Turn the burner switch to
the ‘OFF’ position.
STEP 4: Turn off water.
STEP 2: Place the detergent tube
in fresh water and open the
detergent valve and spray gun,
allowing the detergent lines to be
flushed and the burner to cool.
Otherwise coil damage may occur.
STEP 3: After water has cooled,
push or turn pump switch to ‘OFF’
position. If the machine will be
turned off for an extended period of
time, put the gas cock on the gas
valve in the ‘OFF’ position.
Landa VHG Operator’s Manual 8.913-952.0 - BR
To Next Page
Loading...
