Need help?Do you have a question about the Landis S-500 and is the answer not in the manual?
Key safety rules to follow before operating the Landis S-500 Sander.
Proper placement, leveling, and safe electrical hookup for the Sander.
Procedures for correctly applying, tagging, and releasing lockout devices.
Verifying belt tracking and initial power connection checks.
How to align belts and detailed steps for replacing 1 1/2" belts.
Details on bayonet-mounted accessories and spanner wrench usage.
Information on the heel breaster attachment and its use.
Routine cleaning of dust collection and machine upkeep.
Detailed steps for removing and installing the sanding motor.
Guide for replacing the sanding shaft and its bearings.
Fixing lost suction, belt creep, and belt slippage issues.
Various brushes, grit wheels, and bayonet fittings listed by type.
Different sanding wheels, contour sanders, and track wheel accessories.
Attachments for Naumkeag function, heel dressing, and polishing.
Long-lasting diamond grit sleeves and grenade covers.
Labels for components visible from the front and back of the Sander.
Part numbers and descriptions for motors, shafts, brushes, and wheels.
Part numbers for V-belts, pulleys, hubs, and idler assemblies.
Specific part numbers for sanding belts of different widths and grits.
Part numbers for specialty brushes and other machine components.
Part numbers for welt brushes, flap wheels, and abrasive paper.
Labels and part numbers for front and back-facing components.
Part numbers for V-belts, pulleys, motor parts, and idler assemblies.
To Next Page
General