L&S LSREM24 - User Manual

To Next Page

Working Frequency : 2.4GHz

Power: CR2032(3V)button lithium battery

Remote Range:≤15m

Ta:0℃~35℃

Memory Fuction: last setting will be saved

Switching Power: up to 5A.

Application:To control the color temperature adjustable of LED lamps

Load:DC 12V or 24V color temperature adjustable LED lamps

Rated Supply Rated Load

60W

120W

12VDC

24VDC

Receiver

Holder

Remote-Controller

Dimension in mm

transmitter,KZQ-8YKC-K

KZQ-9XJC-4

8.5

12.7

Fix Holder

For Screw Only

L&S 2.111.0008.01.01.00

Emotion Remote

Control System

For Double-Sided Adhesive Tape Only

CR202 3

Battery Installation

On/Off Button

Increases

brightness

Indicator

Color

Temperature

Wheel

Press to decrease by 10% brightness,

there are 10 brightness levels.

Hold

down to decrease brightness

gradually down to 10%.

Hold down to increase brightness

gradually down to 100%.

Press to increase by 10% brightness,

there are 10 brightness levels.

Warmwhite

Coolwhite

Rotate to select the desired color temperature

with the indicator line.

Decreases

brightness

Control Panel

Technical Parameters

www.ls-light.com

Need help?

Do you have a question about the L&S LSREM24 and is the answer not in the manual?

This document describes the "Emotion Remote Control System" for LED lighting, providing details on its dimensions, technical specifications, battery installation, and various functions.

Function Description

The Emotion Remote Control System allows users to wirelessly control LED lighting. It supports dimming, color temperature adjustment, and master/slave configurations for controlling multiple receivers. The system is designed for ease of use with a dedicated remote controller that features buttons for brightness adjustment, color temperature control, and on/off functions.

Important Technical Specifications

Receiver Dimensions:

Receiver KZD-S03-4: 16 mm (height) x 40 mm (width) x 78 mm (length)

Remote Controller Dimensions:

Remote Controller KZD-SYX-4: 90 mm (height) x 50 mm (width) x 8.5 mm (thickness)
Holder: 57 mm (height) x 54 mm (width) x 12.7 mm (thickness)

Working Frequency: 2.4GHz Battery Type: CR2032 button lithium battery Remote Range: ≤15m Working Temperature: -20°C to 55°C Memory Function: Last setting will be saved Switching Current: Up to 8A Application: To control the color temperature adjustable LED lamps. Load: For 12V or 24V color temperature adjustable LED lamps.

Rated Supply and Load:

12VDC: 60W
24VDC: 120W

Usage Features

Battery Installation: The remote controller uses a CR2032 button lithium battery. To install, open the battery compartment on the back of the remote, insert the battery with the correct polarity, and close the compartment.

Fix Holder: The remote controller comes with a fix holder that can be mounted using double-sided adhesive tape or screws.

Control Panel: The remote controller features a circular control panel with various buttons:

On/Off Button: Turns the lights on or off.
Brightness Adjustment: Buttons to increase or decrease brightness.
Color Temperature Wheel: A circular control to adjust the color temperature from warm white to cool white.
Preset Brightness/Color Temperature: Buttons to quickly set brightness to 10%, 60%, 70%, 80%, 90%, 100% or to set color temperature to warm white, cool white, or a mixed setting.

Connecting the System:

Connect the LED driver to AC power, then connect the LED driver to the distributor, and finally connect the lamp to the distributor.
The receiver connects between the LED driver and the lamp.

Matching Receiver to Controller:

Press the "Test Button" on the receiver.
Press the "On/Off button" on the controller for more than 5 seconds.
If the indicator light on the receiver flashes and then turns off, the controller is successfully paired with the receiver.

Master/Slave Mode: For controlling multiple products or products at a greater distance, the system supports master/slave mode.

One controller can control an unlimited number of receivers.
In a master/slave setup, one receiver acts as the master, and others as slaves.

Setting Master Receiver Function:

Press the "Test Button" on the receiver for more than 5 seconds.
If the indicator light flashes after 5 seconds, the controller will work well with the receiver, and the receiver is set as master.

Note: Only one master receiver is allowed in the wireless network. If a slave receiver needs to be set as master, it can be done by following the "Match the master receiver to transmitter" step, ensuring the original master receiver is powered on.

Canceling Master Receiver Function:

Press the "Test Button" on the receiver for more than 5 seconds.
After 5 seconds, if the indicator light turns off, the master receiver function is canceled.

Maintenance Features

Memory Function: The system retains the last settings (brightness, color temperature) when the receiver has been working for at least 60 seconds while rotating the color wheel. This means your preferred light settings will be remembered even after turning the device off and on.

Sleeping Function: The remote controller enters a dormant state after 60 seconds of inactivity to conserve battery life. To reactivate it, simply press any button.

L&S LSREM24 Specifications

General

Brand	L&S
Model	LSREM24
Category	Lighting Equipment
Language	English