5: Commands and Levels
EDS1100/2100 Command Reference 140
negotiation.
<ip address> IP address of the peer device.
Enters the serial line PPP level.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be configured.
Enters the configure-terminal level for the network.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be configured.
Sets the user name for PPP authentication.
Stores the current configuration in permanent memory.
query port (config-query_port) level commands
Zeros Query Port counters
Returns to the config level.
Unzeros Query Port counters
Displays statistics and information about the query port.
Displays the last 20 commands entered during the current CLI
session.
Disables response to 77FE requests.
Permits response to 77FE requests.
Stores the current configuration in permanent memory.
Ping destination continuously with 5 second timeout
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
Displays the last 20 commands entered during the current CLI
session.
Trace route to destination
rss (config-rss) level commands
Restores the default number of RSS feed entries.
Exits to the configuration level.
Sets the maximum number of RSS feed entries.