Lantronix SecureBox SDS1101 User Manual

6
WWW.LANTRONIX.COM
Quick Start Guide
SDS1101/SDS2101
7
ASSIGN IP ADDRESS AND CONFIGURE
1. Click the Start button on the Task Bar and select Programs > Lantronix >
DeviceInstaller > DeviceInstaller. The DeviceInstaller window displays.
2. Note the device IP address.
3. Access Web Manager by entering the device IP address in the address
bar of a browser. The device's factory defau
lt username is left blank and
f
actory default password is the last 8 characters of the Device ID (for
devices manufactured after January 1, 2020) or is left blank (for all older
d
evices).
4. As
sign an IP address in the network settings and perform other
configuration.
Figure 1. DeviceInstaller Window
Note: For details about configuration settings, see the SDS User Guide.
INSTALL THE DEVICEINSTALLER GUI
1. Insert the CD into your CD-ROM drive.
If the CD does not launch automatically:
a) Click the Start button on the Task Bar and select Run.
b) Enter your CD drive letter, colon, backslash,
Launch.exe (e.g., E:\Launch.exe).
2. Click the DeviceInstaller button.
3. Respond to the installation wizard prompts.

Lantronix SecureBox SDS1101 Specifications

General

Brand	Lantronix
Model	SecureBox SDS1101
Category	Network Hardware
Language	English